Wtb Intake manifold from e46 b3S 3.4l

Desperate for something for your ALPINA.<br>
Ask here and hopefully someone can sort you out.

Moderators: Charles, neil, D4

Post Reply
sbullard332i
Posts: 4
Joined: Tue Jun 13, 2017 2:37 pm

Wtb Intake manifold from e46 b3S 3.4l

Post by sbullard332i » Tue Jun 13, 2017 4:54 pm

Looking for a intake manifold from a 2002-2006 Alpina B3 S with 3.4L M52 engine for a racing project thanks Scott

simon13
ALPINA
ALPINA
Posts: 3385
Joined: Sun Feb 26, 2006 9:10 pm
Location: Camberley, Surrey

Post by simon13 » Tue Jun 13, 2017 8:36 pm

if your the guy off facebook iwas talking to the other day your best bet will be trying to find and engine complete. No one will be splitting one of these down.

They make 300bhp and 266lbs out of the box and rev like an M engine. You could fit more aggresive cams i guess but whatever car your fitting it too the stock 3.4 engine would perform well!
Image

sbullard332i
Posts: 4
Joined: Tue Jun 13, 2017 2:37 pm

Post by sbullard332i » Tue Jun 13, 2017 11:23 pm

Hi Simon yes same guy, I have a few people searching for a complete engine in UK now

sbullard332i
Posts: 4
Joined: Tue Jun 13, 2017 2:37 pm

Post by sbullard332i » Tue Jun 13, 2017 11:25 pm

I do have a set of schrick 276/270 camshafts that would do nice

simon13
ALPINA
ALPINA
Posts: 3385
Joined: Sun Feb 26, 2006 9:10 pm
Location: Camberley, Surrey

Post by simon13 » Wed Jun 14, 2017 12:32 am

The stock cams are about 240 something? On the B3S engine both inlet and exhaust cams are to alpina spec i'm not sure of their duration

Good luck!
Image

Post Reply