coupe door aperture seals

rc944 · Post by **rc944** » Fri Jun 29, 2018 11:38 am

resolved the common sagging issue in the past by removing and re-applying butyl tape and holding in place overnight to allow the butyl to 'cure' with masking tape

worked for the most part but not brilliant

the hot weather has now caused the seal from the other door to come away. what are you guys doing to solve this and any tips

jolls · Post by **jolls** » Fri Jun 29, 2018 1:38 pm

I used this http://www.unibond.co.uk/en/diy-adhesiv ... -roll.html. I've had no problems since using it.