Got a question about your ALPINA ask it here !
You've got the car now you need to know something, techincal advice, specific questions etc.
Moderators: Charles, neil, D4
-
Abanko
- A
- Posts: 70
- Joined: Wed Jun 21, 2017 2:41 pm
- Location: Notts
Post
by Abanko » Wed Dec 20, 2017 8:21 pm
Hi
I had two PDC sensors at the rear that were faulty as was getting the 5 second beep when the car is put in reverse for the first time after start.
I have replaced the sensors and no longer get the beep but I do not get any sound when reversing close to objects. I can hear clicking from all the sensors when the ignition is on and car in reverse. Does anyone know if the ECU/something else needs fault codes resetting?
Cheers
B10 V8 #842
-
Chas
- ALPINA
- Posts: 3993
- Joined: Wed Apr 28, 2004 11:37 am
- Location: Aberdeenshire
Post
by Chas » Wed Dec 20, 2017 9:09 pm
I replaced two of mine on the B10V8 and it was just plug and play. They're not coded to anything till after circa 2003?
-
Abanko
- A
- Posts: 70
- Joined: Wed Jun 21, 2017 2:41 pm
- Location: Notts
Post
by Abanko » Wed Dec 20, 2017 9:37 pm
ok thanks - maybe control module is caput - will test that next.
B10 V8 #842